Halo Lights – With Indicators

Halo Lights – With Indicators

Installation Instructions for Halo Lights – With Indicators

LED Halo light mounted to a custom 3D printed housing to fit the OEM fog light bumper opening on a Mk2 Mazda MX5/Miata. The item has a honeycomb pattern in the light opening to help reduce debris from being sent through it. Also pictured is the wiring and control box for the LED halos. Item is set in a well lit, light grey background.

The halo lights are simple to set up, requiring only three connections:

  1. 12V Power
  2. Ground
  3. 12V Signal from the indicators

Wiring Notes

• The halo lights do not have much wiring attached to them, you may need additional wires, which are not included in the package.

• There are various ways to wire the kit, so choose the method that best suits your installation.

• Refer to the diagram below.

LED Halo light mounted to a custom 3D printed housing installed onto an OEM silver Mazda Mx5 NB bumper. The light is turned on, emitting an amber colour. The item is pictured at night to show its brightness in the dark.

Important

This product should be installed by a qualified professional to ensure your safety and prevent any potential damage to your vehicle.

Disclaimer

Update Create will not be held responsible for any damage, injury, or other issues arising from the misuse of this product or incorrect installation. It is your responsibility to:

  1. Ensure the product is installed correctly and safely.
  2. Comply with all local laws and regulations regarding the use of LED lights on vehicles.

Failure to adhere to these guidelines may result in legal or safety consequences for which Update Create cannot be held accountable. Thank you for purchasing an UpdateCreate product! If you have any questions or encounter any issues, please don’t hesitate to contact us.

Back to blog

Leave a comment